Showing 21–32 of 32 results

  • Rotary Table Tilting - Tilting MT-2 Bore 4"/100mm

    Rotary Table Tilting MT-2 Bore – 4″/100mm

    0 out of 5
    • Can be Tilted from 0 to 180°.
    • Engage & Disengage Function for manual indexing.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Rotary Table Horizontal & Vertical - 4"/100mm

    Rotary Table – 4″/100mm

    0 out of 5

    ROTARY TABLE 4″ / 100mm

    • Chuck Diameter : 100mm / 4″
    • Vertical center Height : 2-1/16″ (Approx. 51mm)
    • Hand Wheel can be set to Zero
    • Hand Wheel Graduated in 10 Min Divisions
    • Calibrated in 5Min Increment around the rim
    • 36:1 ratio
    • Can be used both Vertically & Horizontally.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • ROTARY TABLE SET 110MM

    0 out of 5
      ROTARY TABLE

    • Vertical Center Height : 80mm
    • Table Diameter : 110mm
    • Table Graduated to 360 Degrees
    • CEnter Bore : MT-2
    • Worm Gear has 90:1 ratio
    • Vernier Scale Calibrated To 10 Seconds
      DIVIDING PLATE SET

    • Plate 1 – 15, 16, 17, 18, 19, 20
    • Plate 2 – 21, 23, 27, 29, 31, 33
    • Plate 3 – 37, 39, 41, 43, 47, 49
    • Comes complete with Necessary Screws, Washers & handles.
      TAILSTOCK

    • Heavy Duty & Manufactured from Closed Grained Cast Iron
    • Center Height Adjustable to 80 – 100mm
    Read moreDone

  • ROTARY TABLE SET 6"/150MM

    0 out of 5
      ROTARY TABLE

    • Vertical Center Height : 105mm
    • Table Height : 80mm
    • Table Graduated to 360 Degrees
    • 1 Turn will move the Table 4 Degrees
    • Vernier Scale Calibrated to 10 Sec
      DIVIDING PLATE SET

    • Plate 1 – 15, 16, 17, 18, 19, 20
    • Plate 2 – 21, 23, 27, 29, 31, 33
    • Plate 3 – 37, 39, 41, 43, 47, 49
    • Comes complete with Necessary Screws, Washers & handles.
      TAILSTOCK

    • Heavy Duty & Manufactured from Closed Grained Cast Iron
    • Center Height Adjustable to 80 – 100mm
    Read moreDone
  • Rotary Table Tilting - 4''/100mmRotary Table Tilting - 4''/100mm

    Rotary Table Tilting – 4”/100mm

    0 out of 5

    ROTARY TABLE TILTING 4″ / 100mm

    • Chuck Diameter : 100mm / 4″
    • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
    • Base dimension : 145mm x 126mm
    • Two 10mm Mounting slots on the base
    • Table Surface has 4 Radial t Slots for 8mm T Nuts
    • Graduated 0 – 360° in 5° Increments
    • Winding Handle is Graduated 0-10° in 5 Min division.
    • Tilts upto 90° with scale graduated to 1°

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Rotary Table Tilting - 4-3/8"(110mm)

    Rotary Table Tilting – 4-3/8″(110mm)

    0 out of 5
    •  Can be Tilted from 0° to 180°.
    •  Engage & Disengage Function for manual indexing.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Rotary Table Horizontal & Vertical -4-3/8"(110mm)

    Rotary Table – 4-3/8″(110mm)

    0 out of 5
    • This Rotary Table is manufactured from close grained graded cast iron.
    • Chuck Diamater 110mm / 4″.
    • Rotary Table can be used either Horizontal ro Vertical.
    • Table Has a height of 75mm / 3″
    • Centre Bore : MT – 2
    • Gear Ratio 90:1
    • This Rotary Table has three 6mm T-Slots.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • ROUND VISE FOR MINI ROTARY TABLE

    0 out of 5
    • Circular Vise for 100mm & 75mm Rotary tables.
    • Circular Vise for 100mm & 75mm Rotary tables.
    • Comes complete with Clamping Nuts.
    • High Grade Casting
    Read moreDone
  • T - Nuts For Rotary Tables

    T – Nuts For Rotary Tables

    0 out of 5
    • Economical method of fastening.
    • Finely Blackodized.
    • Resemble T-in Profile.
    • Provide Better retention.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • T SLOT MINI CLAMPS

    0 out of 5





    T Slot Mini Clamps

    • A safe, quick and simple way to clamp Dies, Work-pieces and fixtures
    • Easily inserted into existing T-Slots, easy positioning without additional fixing
    • Manually operated. No hydraulic or pneumatic components necessary
    • Clamping force is achieved quickly and easily by turning the Grub Screw


    Read moreDone
  • Tail Stock For Rotary Table (78mm -107mm)

    Tail Stock For Rotary Table (78mm -107mm)

    0 out of 5

    ADJUSTABLE TAILSTOCK

    • Manufactured from High Grade Close Grain Cast Iron
    • Use it with our 100mm & 150mm Rotary Tables

    Suitable For Fallowing Rotary Tables :-

    • GRT-HV04/GRT-HV04T/GMT-0213/GMT-2134/GMT-213T

     

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Adjustable Tail Stock For Rotary Tables (110mm-153mm)

    Adjustable Tail Stock For Rotary Tables

    0 out of 5
    • Manufactured from High Grade Close Grain Cast Iron

    Suitable for following Rotary Tables.

    • GMT-0214/GMT-0215
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content