Showing 1–20 of 316 results

  • Baby Vice - Swivel Base

    Baby Vice – Swivel Base

    0 out of 5
    • Compact & Ideal Vice for DIY Enthusiasts & Model
      Makers & also used in light duty jobs.
    • Manufactured from high-grade casting.
    • Vices are enameled finished and chromed handle and screw.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Bearing Puller -2 Leg

    Bearing Puller -2 Leg

    0 out of 5

    • Heavy-Duty Construction: Built from high-strength forged steel for maximum durability and long service life.

    • Adjustable 2-Leg Design: Arms can be positioned to fit a wide range of bearings, gears, pulleys, and hubs.

    • Strong Gripping Power: Precision-machined jaws ensure a secure grip for safe and efficient removal.

    • Smooth Extraction: Includes a hardened center forcing screw for easy, controlled pulling with minimal effort.

    • Versatile Use: Ideal for automotive repair, machinery maintenance, engineering workshops, and DIY applications.

    • Corrosion-Resistant Finish: Rust-protected coating ensures reliability even in tough shop conditions.

    • Compact & Easy to Use: Lightweight and portable design makes it perfect for use in tight spaces or on the go.

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Bench Vice

    Bench Vice Fixed Base -Heavy Duty

    0 out of 5
    • Bench vice are Manufactured from shock resisting cast iron, free from sand holes, pits, blow holes, scratch and other imperfection.
    • Unbreakable malleable steel nut for extra tuff grip.
    • Jaws manufactured from special carbon steel, properly heat-treated grinded and serrated to ensure a fast non-slip grip.
    • SWIVEL BASE specially designed having three holes for mounting Rotates through 360° on base & can be locked positively at any position.
    • FIXED BASE having mounting slots too which can be fixed securely and firmly over worbench.
    • Hold secuerly all kind of workpeices for various hand tools and power tools operation.
    • Primarily used to provide a stable surface for tasks like sawing, filing, drilling, grinding, and tapping. It is a fundamental tool for holding objects for building, repair, modification, and maintenance in workshops, garages, and home workspaces.
    • Each vice is precision-crafted and manufactured carefully inspected to be free from sand holes, pits, blowholes, scratches, and any other imperfections. This attention to detail guarantees that every piece leaving our factory meets the highest standards of workshop reliability and mechanical accuracy.

    Do check our other range of Bench vices by clicking here

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Boring Bar Set

    Boring Bar Sets

    0 out of 5
    • Manufactured from good quality tool steel .
    • Supplied with one Allen key.
    • Tool bit not included .
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Boring Head-38mm.

    Boring Head – 38mm

    0 out of 5
    • Enlarging existing holes to precise diameters.

    • Achieving tight tolerance bores.

    • Improving the concentricity and roundness of holes.

    • Producing fine surface finishes inside cylindrical cavities.

    • Boring heads are indispensable tools in precision machining, offering unmatched accuracy in internal diameter cutting.
    • Their adjustability, reliability, and ability to produce fine surface finishes make them an excellent choice for finishing operations where tolerances are tight and precision is critical.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Boring HeadsBoring Heads

    Boring Heads (METRIC & INCHES)

    0 out of 5
    • Enlarging existing holes to precise diameters.

    • Achieving tight tolerance bores.

    • Improving the concentricity and roundness of holes.

    • Producing fine surface finishes inside cylindrical cavities.

    • Boring heads are indispensable tools in precision machining, offering unmatched accuracy in internal diameter cutting.
    • Their adjustability, reliability, and ability to produce fine surface finishes make them an excellent choice for finishing operations where tolerances are tight and precision is critical.
    • It is mounted onto the machine spindle, and during operation, it rotates to cut into the workpiece. The primary function of a boring head is to allow for fine adjustments in the cutting diameter

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Boring Holder For Dixon Type Tool Post

    Boring Holder For Dixon Type Tool Post

    0 out of 5
    • Spare Boring Holders for Dixon Type Quick Change Tool Post Sets.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Non sparking Brass hammer

    Brass Hammer – Non Sparking

    0 out of 5
    • The GARVIN Brass Hammers with Aluminium handles, for ultimate safety and precision.
    • This hammer provides non-sparking and non-marring performance, making it ideal for work near flammable materials or delicate surfaces.
    • Ensures superior strength, excellent shock absorption, and a comfortable, non-slip grip, reducing vibration and operator fatigue during prolonged use.
    • Trust in the safety, precision, and comfort that the GARVIN Brass Hammers with Fibre grip handles deliver, elevating your work to new levels of excellence.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Round Dies B.S.W / B.S.F.- Left Hand

    0 out of 5
    • Carbon steel round dies, specifically those for B.S.W. (British Standard Whitworth) and B.S.F. (British Standard Fine) threads, are tools used for cutting or creating external threads on cylindrical rods or pipes.
    • These dies are typically circular and have multiple cutting edges, allowing for efficient thread creation or repair.
    • They are commonly used in various applications, including maintenance, repair, and manufacturing.
    • (Also available in H.S.S)
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Round Dies (Left Hand Die Set) -UNC/UNF

    0 out of 5
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Round Dies Set (Left Hand ) – UNC/UNF

    0 out of 5
    • For machinery or components where a standard clockwise-threading bolt would loosen due to rotational forces.
    • Some vehicles, especially older ones, use left-hand threads on lug nuts or other components to prevent them from loosening with wheel rotation.
    •  Certain pipe connections use left-hand threads.
    • Used when building equipment that requires components to tighten in the opposite direction of rotation
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Cast Iron Slotted Angle Plates – Webbed End

    0 out of 5
    • Manufactured from good quality seasoned casting.
    • Properly hardened & ground from all the sides.
    • Properly Machined 90° Square.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Cast Iron Vee Blocks – With Clamp

    0 out of 5
    • Made from quality casted seasoned steel.
    • Supplied in matched pairs.
    • The “V” is accurate to 900.
    • Very useful tool for laying out round work & holding it for machining
    • Cat No. GBV-6600 to GBV-7250 are supplied with a pair of clamp.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Cast Iron Vee Blocks – Without Clamp

    0 out of 5
    • Made from quality casted seasoned steel.
    • Supplied in matched pairs.
    • The “V” is accurate to 900.
    • Very useful tool for laying out round work & holding it for machining
    • Cat No. GBV-6600 to GBV-7250 are supplied with a pair of clamp.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drill Type ‘C’ – 60° Long Series

    0 out of 5
    • A Type ‘C’ Center Drill is typically known as a radius-form center drill.
    •  This extended length is beneficial for reaching into deeper pockets or hard-to-access areas in a workpiece.
    •  Longer drills may be more susceptible to deflection or “walking” during the drilling process, potentially leading to inaccuracies, particularly when working with harder materials.
    • In essence, a Type ‘C’ – 60° Long Series center drill combines the benefits of a radius-form center hole for precision with an extended reach for accessing challenging locations.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drills – 5 Pc Set

    0 out of 5
    • Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.
    • Can be used to make conical holes for a lathe center in order to make a starting point for a standard twist drill.
    • Designed to prevent the twist drill from walking, as well as for producing center holds in components or work pieces with require machining between centers.
    • Suitable for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drills Type ‘A’ – 60°

    0 out of 5
    • A combined drill and countersink, designed to ANSI B94.11M standards and with an60-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
    • This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drills Type ‘A’ (DIN 333)

    0 out of 5
    • The primary purpose of a center drill is to create a small, precise pilot hole or conical indentation in a workpiece.
    • Type A center drills are well-suited for general applications and are particularly effective on softer materials such as mild steel and aluminum, where precision and speed are prioritized.
    • They are a staple in workshops due to their versatility and reliable performance.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drills Type ‘B’ (DIN 333)

    0 out of 5
    • The primary purpose of a center drill is to create a small, precise pilot hole or conical indentation in a workpiece.
    • Type A center drills are well-suited for general applications and are particularly effective on softer materials such as mild steel and aluminum, where precision and speed are prioritized.
    • They are a staple in workshops due to their versatility and reliable performance.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Drills Type ‘A’ – 82°

    0 out of 5
    • A combined drill and countersink, designed to ANSI B94.11M standards and with an 82-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
    • This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content