Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.
Can be used to make conical holes for a lathe center in order to make a starting point for a standard twist drill.
Designed to prevent the twist drill from walking, as well as for producing center holds in components or work pieces with require machining between centers.
Suitable for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A combined drill and countersink, designed to ANSI B94.11M standards and with an60-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A combined drill and countersink, designed to ANSI B94.11M standards and with an 82-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
Request Quote
This product has multiple variants. The options may be chosen on the product page
This tool is designed with a smaller diameter drill bit for creating the pilot hole and a larger diameter countersink section for chamfering the hole’s edge.
This type of tool combines the functions of a drill and a countersink into one tool, allowing for the creation of both the pilot hole and the countersunk recess in a single operation.
Request Quote
This product has multiple variants. The options may be chosen on the product page
Single flute countersinks are particularly useful for chatter-free, smooth countersinking and deburring, especially in smaller holes or when multi-flute countersinks cause vibration
The single cutting edge provides a smoother, more controlled cut compared to multi-flute countersinks, minimizing vibration and chatter.
They are effective for removing burrs and chamfering edges of drilled holes, particularly in materials like steel, aluminum, and copper.
Single flute countersinks are often preferred when the hole size is too small for a multi-flute tool to enter effectively.
They are available with various included angles (e.g., 60°, 82°, 90°) to accommodate different screw head types.Â
Request Quote
This product has multiple variants. The options may be chosen on the product page
Six-flute countersinks are tools used to create a conical or chamfered opening at the top of a drilled hole. This allows the head of a fastener, such as a screw or bolt, to sit flush with or below the surface of the material, creating a smooth and finished look.
Chatter-free operation and smooth finish:Â The six-flute design helps to minimize chatter and vibration during use, resulting in a cleaner and smoother surface finish.
Effective chip removal:Â The design also facilitates efficient chip removal, which further contributes to a smoother cutting process.
Versatility:Â These countersinks are suitable for various tasks, including countersinking, chamfering, and deburring.
Suitable for various materials:Â Six-flute countersinks can be used with a range of materials, including wood, plastic, aluminum, and other soft metals.
Request Quote
This product has multiple variants. The options may be chosen on the product page
Countersinking:Â Creating a conical enlargement at the end of a drilled hole, allowing the head of a countersunk screw to sit flush or below the surface of the material.
Chamfering:Â Creating a bevelled edge or angled corner on a workpiece.
Deburring:Â Removing sharp edges or burrs left after drilling or machining.
Request Quote
This product has multiple variants. The options may be chosen on the product page
Six-flute countersinks are tools used to create a conical or chamfered opening at the top of a drilled hole. This allows the head of a fastener, such as a screw or bolt, to sit flush with or below the surface of the material, creating a smooth and finished look.
Chatter-free operation and smooth finish: The six-flute design helps to minimize chatter and vibration during use, resulting in a cleaner and smoother surface finish.
Effective chip removal: The design also facilitates efficient chip removal, which further contributes to a smoother cutting process.
Versatility: These countersinks are suitable for various tasks, including countersinking, chamfering, and deburring.
Suitable for various materials: Six-flute countersinks can be used with a range of materials, including wood, plastic, aluminum, and other soft metals.
Request Quote
This product has multiple variants. The options may be chosen on the product page
