Showing all 9 results

  • HSS Parting tool bit / Cut Off Blades – 5% Cobalt

    0 out of 5
    • HSS parting tool bits/cut-off blades with 5% cobalt are high-speed steel tools designed for cutting off materials on lathes.
    • They are typically made from HSS M35 grade with 5% cobalt content. 
    • These tools offer a balance of hardness, toughness, and wear resistance, making them suitable for various materials and machining applications. 
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting & Grooving Holders- SGTHR

    Parting & Grooving Holders- SGTHR

    0 out of 5
    • Supplied with GTN-3 Insert.
    • Spare Insert Cat No-GTN-3-3mm
    • Used for parting and grooving on turning machines.
    • They are used for turning, parting-off, and deep grooving operations on lathes and CNC machines.
    • Quenching and hardening, anti-corrosion and anti-vibration, high gloss and wear resistance, smooth chip discharge.
    • The professional designed grooving parting tool can be used for ensure fast and accurate cutting with impressive results
    • The whole is of high temperature heat treatment, which has high hardness, low temperature impact toughness, improved cutting performance.
    • Fast cutting speed improves work efficiency and save time and cost, offers you a better using experience

     

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting Holders For Dixon Type Tool Post

    Parting Holders For Dixon Type Tool Post

    0 out of 5
    • Spare Parting Holders for Dixon Type Quick Change Tool Post Sets.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Cut Off Tool Holders-Parting Tool Holders

    Cut Off Tool Holders-Parting Tool Holders

    0 out of 5
    • Supplied in three shapes; Straight, Left & Right Hand.
    • Manufactured from fine quality special steel, Hardened & Ground and finely blackodized
    • Supplied with one key & bolt but without tool bit
    • Groves are properly manufactured to avoid play & breakage of blades.
    • Very useful tool for European & English Lathes.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • HSS Parting Tool Bits / Cut Off Blades – M-2 Grade

    0 out of 5
    • HSS M2 grade parting tool bits, also known as cut-off blades, are commonly used for machining operations on lathes and other machines.
    • They are made from high-speed steel (HSS) and specifically from the M2 grade, which is known for its good wear resistance and ability to maintain hardness at elevated temperatures.
    • They are suitable for parting off (cutting) operations on various materials including mild steel, alloy steels, and tool steels. 
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting Tool Holder - Mini Clamp Type

    Parting Tool Holder – Mini Clamp Type

    0 out of 5
    • A Very Small & Popular Holder for Model Makers & Watchmakers
    • Precision Ground & Blackodized Surface
    • HSS Parting Blade Included
    • Positive Locking of Blade with thicker Clamp to hold Blade.
    • The tool holder is designed for “parting” or “cut-off” operations on a lathe: plunging a thin blade into the workpiece to separate a finished section or remove it from bar stock.
    • A “mini” version means it’s sized for smaller lathes or light duty setups (e.g., model makers, watchmaker lathes, mini lathes).
    • The clamp-type design offers secure blade fastening, reducing blade movement during cutting which improves finish and tool life.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting Tool Holders - Comet Type

    Parting Tool Holders – Comet Type

    0 out of 5
    • Suitable for Comet Lathes
    • Precision Ground with Blackodized Surface

    • Parting-off (cutting) operations on lathes

    • Grooving operations

    • Use in both production and toolroom settings

    • Improved cutting performance due to rigid and stable design

    • Minimizes tool breakage and chatter

    • Suitable for both rough and finish parting

    • Long service life and reduced setup time

     

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting Tool Blocks-Indexable

    Parting Tool Blocks-Indexable

    0 out of 5
    • Parting Off Blocks are manufactured from Hardened Alloy Steel to avoid vibration while in operation.
    • Excellent Clamping Force with the help of 3 & more Screws over the clamping Plate.
    • Integral flexible clamping Applicable for both right and left hand turning operations
    • A Very Suitable tool to be used on almost all lathes.
    • Can be used both with HSS Blades & Carbide tipped Indexable Parting baldes.
    • Indexable Blades comes without Inserts. Picture is for reference only. Please order Inserts Seperately.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Parting Tool Holder -Eclipse Type

    Parting Tool Holder -Eclipse Type

    0 out of 5
    • Manufactured from High-Grade Steel, FullyHardened
    • Supplied With Suitable Wrench
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content