Showing 21–33 of 33 results

  • Drive Pin Punches Brass

    Drive Pin Punches Brass

    0 out of 5
    • Manufactured from finest quality solid brass 5/16″ Hex Stock.
    • Ideal when working in no spark situation.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Gasket Punching Table

    0 out of 5
    • A Light weight only Approx 12 Kg., easy to handle. Can be easily used on any workbench.
    • Standard punch sizes supplied, 6, 7, 8,9,10,11,12,13,16,19,22,25,28,32,35 and 38mm
    • Can punch gaskets washers, shims out of asbestos, rubber ,Fiber, Oil paper ,Brass, Copper,
      Aluminum and most thin metal sheets.
    • All punches are hardened and tempered for maximum life , punching table also hardened
    • Punches can be re-sharpened b simple grinding to retain cutting edge.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Hollow Punches

    Hollow Punches

    0 out of 5
    • Manufactured from Hardened & Tempered Carbon Steel.
    • Used for Punching holes in leather, plastic etc.
    • Heavy grip knurled body & tapered inside for clearance.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Interchangeable Hollow Punch Set of 10 Pc

    Interchangeable Hollow Punch Set of 10 Pc

    0 out of 5
    • Punches made from high grade alloy steel
    • Each punch is hardened, tempered & grounded to fine cutting edge for sharpness & durability
    • Handle is knurled for firm grip & safety
    • Punch body is grooved for quick & easy change
    • Ideal for punches clean & precise holes on leather, felt rubber & all soft material
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Letter Punch Sets

    Letter Punch Sets

    0 out of 5

     

    • Manufactured from High Grade Alloy Steel
    • Letter set Consisit of 27 Sticks (A to Z)
    • Number sets consist of 9 Sticks ( 0-8 and 6 in inverted to be used as 9)
    • Combination set consisit of 36 sticks (27 + 9)
    • Supplied in Moulded Plastic Box
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Nail Punches Round Head

    Nail Punches Round Head

    0 out of 5
    • Manufactured from Fine Series Tool Steel.
    • Hardened & Tempered to 55 to 60 HRC.
    • Knurled Body with Black Oxidized Finish.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Nail Punches Square Head

    Nail Punches Square Head

    0 out of 5
    • Manufactured from fine tool steel .
    • Hardened and tempered.
    • Knurled body with black oxidized finish.
    • Square head at striking point prevents rolling.

     

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Optical Center punchOptical Center punch

    Optical Center Punch

    0 out of 5
    • This Tool Guarantees to achieve a Precise Punch Location Every time
    • Supplied with 2 Optical Punches. One with Cross Hair with Target Style Marks.
    • Also Included two hardened steel punches (60° & 90°) and Base Holder to hold all the Punches.
    • Align the Position by optical Punch, magnified, and then use the steel Punch to get the mark
    •  Just look down the magnifying lens and align the cross hairs with the mark on your work piece, replace with the supplied punch and give it a tap.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Punch & Chisel Set

    Punch & Chisel Set

    0 out of 5
    • Manufactured from High Carbon Steel
    • Powder Coated finish, Golden Color
    • Hardened & Tempered
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Roll Pin Punch - 9 Pc Set

    Roll Pin Punch – 9 Pc Set

    0 out of 5
    •  Size include : 1/16″, 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 5/16″.
    •  Hemispherical recessed roll pins.
    • Extended shaft.
    • Knurled Grip Handles.
    • Used by Gunsmith, Jewelers & Automotive Industries.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Universal Transfer & Aligner Punch

    Universal Transfer & Aligner Punch

    0 out of 5
    • Grounded Pin.
    • Ideal for Toolmakers, Machinist, Machine & Model Makers.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Utility Punch Set -13 Pc

    Utility Punch Set -13 Pc

    0 out of 5

    SET CONSIST OF

    • 8Pc 1/16″ – 5/16″ (4″/100mm) Drive Pin Punch
    • 5Pc 1/16″ – 5/32″ (4″/100mm) Long Center Punch Round
    • For Model Makers and other small work

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Wad Punch kit

    Wad Punch kit

    0 out of 5
    • Made From High Grade Alloy Steel.
    • Handle is forged & Fully heat Treated & Hardened to take heavy hammer impact.
    • The Pin on handle is spring loaded to eject slug & allow holes  to be accurately centered .
    • Each punch is grounded to fine cutting edge, specially hardened & Tempered for sharpness & durability.
    • Perfect for punching holes in leather, felt, rubber, fiber, plastic & crock etc.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content