-
- Solid Construction With No Moving Parts And Fully Hardened.
- Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
- Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
- Covers Widest Range Of Center Hole Sizes.
- Eliminates Special Centers.
-
- Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
- Bevel Section Is Ground After assembly Running In Its Own Bearing.
- Designed to hold hollow & pipe Works.
-
- A test bar, typically made of hardened alloy steel, is inserted between the lathe’s headstock and tailstock centers.Â
- The bar is designed to have a precise straightness and parallel surfaces, often within 0.0001″ or 0.0002″.Â
- A dial indicator is used to measure the runout of the test bar as it is rotated by hand or the spindle.Â
- The change in the dial indicator reading should be minimal, typically within 0.01mm in 100mm.Â
-
- Suitable For Measuring the Concentricity Of The Working Spindle Of Machine Tools.
- Used To align or check the alignment of the work spindle to the machine table.
- On Lathes, they are used to align the headstock.
-
- Solid Construction With No Moving Parts And Fully Hardened.
- Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
- Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
- Covers Widest Range Of Center Hole Sizes.
- Eliminates Special Centers.
-
- Body is constructed from hardened and ground steel.
- ecentricity between .005 – .010
- Nozzle is assembled with double angular contact bearing.
- Needle roller bearing at the end of the points in the shank.
-
- Body is Constructed from Hardened and Ground Steel
- Ecentricity Between .005 – .010 μ
- Nozzle is Assembled with Double Angular Contact Bearing
-
- Â Manufactured from high grade steel hardened point to impart extra strength.
- Â These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
- Â 3 Jaw self centering 50mm Lathe Chuck.
-
- Manufactured from Case Hardened Steel.
- Eccentricity between 5-8 Microns.
- GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
-
- Manufactured from high grade steel hardened point to impart extra strength.
- Hardened & Ground Steel With 60° Tip Angle.
- Recommended for use upto 1500 r.p.m.
-
- Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
- Assembled with three bearings.
- Eccentricity between .005 – .010 μ
- Body is constructed from hardened and ground steel.
- Widely used by Modelmakers & Woodworkers on mini lathes.
-
- High Precision Bearings.
- Ultra Slim Design of the body.
- Slim Nozzle.
- Three-way running in ball bearings for highest precision.
- Manufactured from hardened steel.
End of content
End of content
