Showing 21–40 of 116 results

  • Bench Block

    0 out of 5
    • Useful for holding work while driving pins, drilling etc.
    • Hardened & ground knurled body for a easy grip.
    • Vee-groove across the face accommodates round & odd shaped stock.
    • Recessed base for lightweight.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Bevelled Edge Steel Squares

    Bevelled Edge Steel Squares

    0 out of 5
    • Blades bevelled on both sides to make line contact with job.
    • Both Blade & Stock is Hardened & ground for straightness & parallelism.
    • Single piece construction from fine quality tool steel.
    • Accuracy within 5 microns.
    • Sets Supplied in Fine Finished Wooden Boxes.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Bore Gauge

    0 out of 5
    • Manufactured from good quality stainless steel.
    • Very useful instrument for measuring bores of cylindrical bores.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Carpenter's Steel Squares

    Carpenter’s Steel Squares

    0 out of 5
    • The steel square is often called the carpenter’s square or framing square
    • These square are used in measuring boards, testing corners, and seting the bevel of boards and tools to various angles.
    • Stock is made of High Quality Seasoned Casting
    • Blades are made of stainless steel.
    • Both sides of blades are fine etched with one side Imperial & one side metric graduations.
    • Very useful and Handy tool for carpenters.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Cast Iron Slotted Angle Plate – Open End

    0 out of 5
    • Manufactured from good quality seasoned casting.
    • Properly hardened & ground from all the sides.
    • Properly Machined 90° Square.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Cast Iron Vee Blocks

    0 out of 5

     

    • Made from quality casted seasoned steel.
    • Supplied in matched pairs.
    • The “V” is accurate to 900.
    • Very useful tool for laying out round work & holding it for machining
    • Cat No. GBV-6600 to GBV-7250 are supplied with a pair of clamp.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Center Finder Round Bar

    Center Finder Round Bar

    0 out of 5
    • Very useful instrument to find the centers on any round object.
    • Can be fixed in collet or the drill chuck.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Center Finder Square

    Center Finder Square

    0 out of 5
    • Used for marking centers on round work pieces.
    • Usually the lines are scribed with the help of scriber.
    • Set Supplied in fine finished wooden box.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Center Gauge

    0 out of 5
    • Use to grind and position thread cutting tool on a lathe.
    • Hardened with lapped edges and notches.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • 6 Pc Center Square Set

    0 out of 5
    •  1 off  Engineers square 50mm/2′.
    •  1 off  Engineers square 100mm/4′.
    •  1 off  Engineers square 150mm/6′.
    •  1 off  Single end Aluminium Scriber.
    •  1 off Center finder Square 38mm/1.1/2′.
    •  1 off steel Rule 150mm /6′

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Plated Steel Squares - Width Base

    Control Steel Squares – With Base

    0 out of 5
    • Manufactured from fine quailty carbon steel.
    • Fully Groung Surface.
    • As per DIN 875.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Depth Gauge

    0 out of 5
    • The gauge consists of nicely finished case hardened steel head.
    • The angular depth gauge comes with an angle of 30° ,45° & 60°.
    • The narrow rule is graduated with one side in Imperials 16ths, 32nds & 64ths and the other side in Millimeters and half miters.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • DIAMOND WEIGHT GAUGE WITH BOOK

    0 out of 5
    • This gauge is ideal if you need to know accurately a diamond size.
    • It is very easy to use by placing the gauge at side and then at the top of diamond.
    • Diamond weight gauge is with reference booklet.
    • The size can then be found by checking the reference booklet.
    • Width and depth are measured with caliper and compared with measurements in table.
    Read moreDone

  • DIE MAKERS'S TOOL KIT OF 5 PCS

    0 out of 5
      Consists of:-

    • 1 of Precision Scriber having carbide point in hexagonal body.
    • 1 of Engineer’s Square 100mm / 4″.
    • 1 of Knife Straight Edge 50mm / 2″.
    • 1 of Bevelled Edge Engineer’s Square 50mm / 2″.
    • 1 of Center Square capacity upto 38mm / 1-1/2″, used for very precise center location.
    • Comes in a fitted timber case.
    Read moreDone

  • Dividers Pencil Holders

    0 out of 5
    • Thick Legs , Box Joint & Riveted Head
    • Hardened & Tempered points
    • Strong Industrial Quality manufactured from Heavy Gauge Steel.
    • Use it for Scribing Arcs & Circles
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Drill Gauges

    0 out of 5
    • Manufactured from good quality Stainless steel.
    • Graduation are properly eatched for true valuations.
    • Used to measure the correct twist drill size.

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Drill Point Gauge

    0 out of 5
    • For properly grinding 59° drill points and for measuring drill tips.
    • Rule and slide are made of steel with satin chrome finish .
    • 6” rigid rule is calibrated in 8ths, 16ths,32nds and 64ths.
    • End clip is adjustable and removable.
    • slide is calibrated in 32nds and 64ths.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Economy Vernier Calipers

    0 out of 5
    • Handy tool for In, Out and depth measurement.
    • Columbus Type features Thum controlled movement with locking device.
    • Precision type => Thumb controlled ball movwment and is Nickel Plated.
    • Graduations in Metric & imperial.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Edge & Center Finder

    0 out of 5
    •  Useful inspection tool for fast & efficient dimensional inspection on production parts.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Edge & Center Finder Set

    0 out of 5
    • Useful inspection tool for fast & efficient dimensional inspection on production parts.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content