Showing all 12 results

  • 9Pc Craftsmen Measuring & Marking Tool Set

    0 out of 5
    • 1 x Marking Knife
    • 1 x Premium Spring Caliper Divider
    • 1 x Premium Spring Caliper Outside
    • 1 x Premium Wing Divider Pencil Holder
    • 2 x Craftsmen Pencil
    • 1 x Eraser
    • 1 x Sharpener
    • 1 x Steel Ruler 6″/150mm
    • A Premium quality Set to complete your tool chest.
    • For architects, draftsman, engineers, and woodworkers.
    • Packed in quality Fitted Case

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Bench Block

    0 out of 5
    • Useful for holding work while driving pins, drilling etc.
    • Hardened & ground knurled body for a easy grip.
    • Vee-groove across the face accommodates round & odd shaped stock.
    • Recessed base for lightweight.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • 6 Pc Center Square Set

    0 out of 5
    •  1 off  Engineers square 50mm/2′.
    •  1 off  Engineers square 100mm/4′.
    •  1 off  Engineers square 150mm/6′.
    •  1 off  Single end Aluminium Scriber.
    •  1 off Center finder Square 38mm/1.1/2′.
    •  1 off steel Rule 150mm /6′

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • DIE MAKERS'S TOOL KIT OF 5 PCS

    0 out of 5
      Consists of:-

    • 1 of Precision Scriber having carbide point in hexagonal body.
    • 1 of Engineer’s Square 100mm / 4″.
    • 1 of Knife Straight Edge 50mm / 2″.
    • 1 of Bevelled Edge Engineer’s Square 50mm / 2″.
    • 1 of Center Square capacity upto 38mm / 1-1/2″, used for very precise center location.
    • Comes in a fitted timber case.
    Read moreDone

  • 11 Pc Engineer’s Measuring & Marking Kit

    0 out of 5

    Consists of:-

    • 1 of Stainless Steel Rule 150mm / 6″.
    • 1 of Brass Automatic Center Punch.
    • 1 of Stainless Steel Universal Gauge.
    • 1 of Stainless Steel Protractor with Depth Gauge.
    • 1 of Engineer’s Square 100mm / 4″.
    • 1 of Single end Aluminium Scriber.
    • 1 of Square Leg Spring Caliper Divider 150mm / 6″.
    • 1 of Brass Vernier Caliper 100mm / 4″.
    • 1 of Bore Gauge / Cylindrical Gauge.
    • 1 of Screw Pitch gauge MM & Inch.
    • 1 of Stainless Steel Screw Cutting Gauge.
    • Comes in a Fitted Timber Case.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • ENGINEER'S STARTER SET OF 5 PCS

    0 out of 5
      Consists of:-

    • 1 of Stainless Steel Pocket Rule.
    • 1 of Replaceable Carbide Point Pen Scriber Cum Magnetic Pick up Tool.
    • 1 of Center Square Capacity upto 38mm / 1-1/2″.
    • 1 of Spring Caliper Divider 150mm / 6″.
    • 1 of Engineer’s Adjustable Steel Square 150mm / 6″.
    Read moreDone

  • ENGINEER'S TOOL SET OF 6 PCS

    0 out of 5
      Consists of:-

    • 1 of Stainless Steel Rule 150mm / 6″.
    • 1 of Pocket Carbide Pen Scriber.
    • 1 of Stainless Steel Screw Cutting Gauge.
    • 1 of Round Head Center Punch 4mm / 5/32″.
    • 1 of Spring Caliper Inside 100mm / 4″
    • 1 of Spring Caliper Outside 100mm / 4″
    Read moreDone

  • ENGINEER'S TOOL SET OF 7 PCS

    0 out of 5
      Consists of:-

    • 1 of Engineer’s Steel Square 100mm / 4″
    • 1 of Stainless Steel Rule 150mm / 6″.
    • 1 of Spring Caliper Divider 100mm / 4″.
    • 1 of Round Head Center Punch 4mm / 5/32″.
    • 1 of Engineer’s Scriber Double Ended 190mm / 7-1/2″.
    • 1 of Jenny Caliper 150mm / 6″.
    • 1 of Adjustable Tap & Reamer Wrench Drop-forged Powder Coated 6mm / 1/4″.
    • Comes in a Fitted Timber Case.
    Read moreDone

  • MACHINIST'S MEASURING SET OF 3 PCS

    0 out of 5
      Consists of:-

    • 1 of Economy Vernier Caliper 0 – 6″ (GVC-7068)
    • 1 of Brass Vernier Caliper 0 – 4″ (GVC-7100)
    • 1 of Economy Micrometer 0 – 25mm (GMM-7075)
    • Set Supplied in Fine Finished Wooden Box.
    Read moreDone

  • MACHINIST'S MEASURING SET OF 6 PCS

    0 out of 5
      Consists of:-

    • 1 of Stainless Steel Pocket Rule.
    • 1 of Angular Depth Gauge 150mm / 6″.
    • 1 of Vernier Caliper 125mm / 5″.
    • 1 of Spring Caliper Divider Black Powder Coated 150mm / 6″.
    • 1 of Spring Caliper Inside Black Powder Coated 150mm / 6″.
    • 1 of Spring Caliper Outside Black Powder Coated 150mm / 6″.
    Read moreDone

  • 5 Pc Measuring And Marking Set

    0 out of 5
    •  1 off Engineers Square 6’/150mm.
    •  1 off Center finder square 1-1/2’/38mm.
    •  1 off Carbide Magnetic Scriber.
    •  1 off Center Punch.
    •  1 off Stainless Steel Protector.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • PROFESSIONAL'S MEASURING TOOL SET OF 6 PCS

    0 out of 5
      Consists of:-

    • 1 of Stainless Steel Rule 150mm / 6″.
    • 1 of Vernier Caliper 150mm / 6 both Metric and Imperial Graduations.
    • 1 of Bevelled Edge Engineer’s Square 100mm / 4″.
    • 1 of Micrometer 0 – 25mm.
    • 1 of Straight Edge with Bevelled Edge 100mm / 4″.
    • 1 of Square Leg Spring Caliper Divider 150mm / 6″.
    • Comes in a Fitted Timber Case.
    Read moreDone

End of content

End of content