Showing all 9 results

  • Carbon Taps -B.A

    Carbon Taps -M.E.

    0 out of 5
    • Specifications Confirm to BS 122 / PART 21964 Taper 1 in 48 Dimensions in Inches
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taps – B.S.P.

    0 out of 5
    • BSP Taps have parallel threads and are shorter in length and are used for parallel threading. Supplied as 2Pc Set..
    • This is a standard thread form used for connecting pipes and fittings. 
    • BSP carbon steel taps are used for cutting or rethreading pipe threads in various materials, especially in situations where high accuracy is not essential. 

    (Also available in H.S.S)

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taps – UNC/UNF (As Per ASME/ANSI B94.9)

    0 out of 5
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taps (Left Hand Size)-Metric

    0 out of 5
    • Left-hand threads are used to prevent loosening in applications where a component rotates counter-clockwise.
    • Left-hand taps have a thread profile that cuts in a counter-clockwise direction when viewed from the shank end.
    • This is the reverse of a standard right-hand tap.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taps – B.S.W / B.S.F.( As Per ASME / ANSI B94.9)

    0 out of 5
    • These taps are made from carbon steel, a material known for its hardness and wear resistance, making it suitable for cutting threads in various materials.
    • These taps are typically used with hand tools (e.g., tap wrench) for threading operations, as opposed to machine taps used in power-driven machines. 
    • In essence, these taps are carbon steel cutting tools designed for creating internal threads (screw threads) in materials based on the British thread standards, and they adhere to the specific dimensional and tolerance requirements outlined in the ASME/ANSI B94.9 standard. 
    • This standard, ASME B94.9, provides the specifications for the design, dimensions, and tolerances of various types of taps, including those for B.S.W. and B.S.F. threads. 
    • (Also Available In H.S.S)
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taper Pipe Taps – NPT Threads

    0 out of 5
    • Carbon steel NPT (National Pipe Taper) pipe taps are designed for creating or repairing tapered pipe threads in various materials, including both ferrous and non-ferrous metals.
    • These taps are characterized by their tapered thread form, which provides a tight seal when used with a sealant like Teflon tape or pipe compound.
    • The nominal size of the tap refers to the pipe fitting it is designed to thread, not the actual tap size.
    • (Also available in H.S.S )
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Machine Screw Carbon Taps

    0 out of 5
    • Machine screw carbon taps are widely used for restoring or cleaning damaged threads in existing components
    • They are useful for securing fasteners in engine parts, interior assemblies, and other vehicle components.
    • These taps create standardized threads for a secure fit in manufactured products, especially for smaller fasteners in enclosures, machinery, and appliances.
    • They perform best in materials that produce easily broken chips, as this prevents debris from clogging the tap’s flutes. 
    • Taper tap: The starting tap in a set, with a long, tapered cutting edge that helps align the tap and begin the threading process.
    • Plug tap: The middle tap, with less of a taper than the taper tap. It continues to cut the thread deeper into the hole.
    • Bottoming tap: The final tap, which has a very minimal taper to cut threads all the way to the bottom of a blind (non-through) hole.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Carbon Taps -B.A

    Carbon Taps -B.A.

    0 out of 5
    • Creating or repairing internal threads by hand.
    •  Used in softer materials like mild steel, aluminum, and plastic.
    • Can also be used in some machine-tapping operations.
    •  Finishes the thread at the bottom of a blind hole.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Carbon Taps – Metric Size

    0 out of 5
    • Carbon steel taps in metric sizes are commonly used for creating internal threads in various materials.
    • When using metric taps, it’s crucial to use the correct tap drill size, which is slightly smaller than the nominal diameter of the thread. The tap drill size can be calculated by subtracting the pitch from the diameter
    • Carbon steel taps are available in different styles like taper, plug, and bottoming, each suited for specific threading applications (e.g., through holes, blind holes). 
    • Also available in H.S.S
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content