Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.
Can be used to make conical holes for a lathe center in order to make a starting point for a standard twist drill.
Designed to prevent the twist drill from walking, as well as for producing center holds in components or work pieces with require machining between centers.
Suitable for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A combined drill and countersink, designed to ANSI B94.11M standards and with an60-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
Request Quote
This product has multiple variants. The options may be chosen on the product page
The primary purpose of a center drill is to create a small, precise pilot hole or conical indentation in a workpiece.
Type A center drills are well-suited for general applications and are particularly effective on softer materials such as mild steel and aluminum, where precision and speed are prioritized.
They are a staple in workshops due to their versatility and reliable performance.
Request Quote
This product has multiple variants. The options may be chosen on the product page
The primary purpose of a center drill is to create a small, precise pilot hole or conical indentation in a workpiece.
Type A center drills are well-suited for general applications and are particularly effective on softer materials such as mild steel and aluminum, where precision and speed are prioritized.
They are a staple in workshops due to their versatility and reliable performance.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A combined drill and countersink, designed to ANSI B94.11M standards and with an 82-degree countersink angle, is a tool that performs both drilling and countersinking operations in a single pass.
This type of tool is commonly used for creating a countersunk hole that allows flat head screws to sit flush with the surface of the material.
Request Quote
This product has multiple variants. The options may be chosen on the product page
This tool is designed with a smaller diameter drill bit for creating the pilot hole and a larger diameter countersink section for chamfering the hole’s edge.
This type of tool combines the functions of a drill and a countersink into one tool, allowing for the creation of both the pilot hole and the countersunk recess in a single operation.
Request Quote
This product has multiple variants. The options may be chosen on the product page
They are well-suited for centering and creating starting points for drilling in various materials such as steel, stainless steel, cast iron, and other materials like metal alloys, copper, iron, wood, and aluminum.
Center drills are crucial for creating a precise pilot hole that prevents a standard drill bit from “walking” or deviating from the intended drilling spot.
They are commonly used before larger drilling operations or when turning workpieces between centers on a lathe.
The use of a Bell Type center drill, particularly for turning operations, helps to create a secure and stable support point, accommodating the lathe’s live center.
They also contribute to improved accuracy, reduced drill bit breakage, and better hole quality in machining processes.
Request Quote
This product has multiple variants. The options may be chosen on the product page
he GARVIN® Centre Finder Ruler is a precision measuring and marking tool designed to quickly locate the exact center of round, square, rectangular, and irregular workpieces. Engineered for professional woodworkers, carpenters, cabinet makers, metal fabricators, machinists, and DIY craftsmen, this tool eliminates guesswork and ensures perfectly centered layouts for drilling, turning, and joinery applications.
Manufactured from premium-grade stainless steel or hardened tool steel (depending on model), the GARVIN Centre Finder Ruler features accurately engraved measurement graduations for long-lasting readability and exceptional precision. Its innovative design allows users to determine the center point in seconds, saving time while improving accuracy on every project.
Whether you’re marking dowel holes, turning wood on a lathe, creating symmetrical layouts, or preparing stock for machining, the GARVIN Centre Finder Ruler delivers reliable and repeatable results.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A chipping hammer is a hand-held tool used primarily for removing slag, spatter, rust, scale, and other unwanted materials from metal surfaces, especially after welding.
It is an essential tool for welders, metalworkers, and construction professionals.
This design makes the hammer highly versatile and effective in various metal-cleaning applications.
Request Quote
This product has multiple variants. The options may be chosen on the product page
A Chisel plane also known as Trimming planes can be useful for cleaning into the corners of stopped rebate i.e a rebate that stops short of the full width or length of the wood, and for trimming proud wooden dowel, plug and dovetail joints.
in short, the shisel plane reaches the parts that other planes simply cannot reach, and it can never be replaced by router planes!
Body manufactured from Ductile cast iron and precision ground all over.
Blade Manufactured from High Carbon A2 Steel and are hardened
Request Quote
This product has multiple variants. The options may be chosen on the product page
A Chisel plane also known as Trimming planes can be useful for cleaning into the corners of stopped rebate i.e a rebate that stops short of the full width or length of the wood, and for trimming proud wooden dowel, plug and dovetail joints.
in short, the shisel plane reaches the parts that other planes simply cannot reach, and it can never be replaced by router planes!
Body manufactured from Ductile cast iron and precision ground all over.
Blade Manufactured from High Carbon A2 Steel and are hardened
Request Quote
This product has multiple variants. The options may be chosen on the product page
Chucking reamers (also known as machine reamers) with a taper shank and spiral flute, conforming to the ANSI B94.2 standard, are rotary cutting tools used to enlarge and precisely finish pre-drilled holes in a variety of materials.Â
The tapered shank is designed to be securely held in the spindle of machine tools like drill presses, lathes, turret lathes, screw machines, and machining centers. This design provides self-holding and accurate alignment.
This design helps efficiently remove chips during the reaming process and can lead to a smoother surface finish and better performance, especially in difficult materials or interrupted cuts.
Used in a wide range of materials including steel, aluminum, cast iron, and other ferrous and non-ferrous materials.
Specifically designed for use in machine tools to achieve precise and smooth holes with tight tolerances.
Used to finish pre-drilled holes to the exact desired diameter and surface finish.
Recommended for reaming harder materials like stainless steel and titanium, especially with carbide versions.
Suitable for applications with interruptions like keyways or cross holes due to the spiral flute design.
 Right-hand spiral flutes are ideal for blind holes as they pull chips away from the bottom of the hole.
Request Quote
This product has multiple variants. The options may be chosen on the product page
Coping saws are designed for very delicate cutting applications (e.g., making intricate shapes or curved lines).
They should not be used to cut material any thicker than 25mm (1 inch approx.). They are often used to shape the edges of wooden moulding, or when creating joints.
Request Quote
This product has multiple variants. The options may be chosen on the product page
Corner clamps, also known as angle or mitre clamps, are essential tools for woodworking that hold two pieces of wood together at a precise angle, typically 90 degrees, ensuring a perfect joint
They are particularly useful when creating frames, boxes, or cabinetry, ensuring right angles are maintained for a seamless finish.
Request Quote
This product has multiple variants. The options may be chosen on the product page
