Showing 1–20 of 41 results

  • Boring Bar Set

    Boring Bar Sets

    0 out of 5
    • Manufactured from good quality tool steel .
    • Supplied with one Allen key.
    • Tool bit not included .
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Sleeves - As Per Din 2185

    Drill Sleeves – As Per Din 2185 ( Hardened & Ground)

    0 out of 5
    • Fully Hardened & Ground.
    • Body hardened to 54-58 HRC.
    • Workshop Grade: Manufactured from Carbon steel and ground outside.
    • To be used to adapt smaller MT Shank tools to larger machine spindles.
    • The concentricity & taper angles are precisely controlled to allow perfect locking and concentric movement to the tool held.
    • Acc Din 2185.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Stands

    Drill Stands

    0 out of 5

    • Universal Compatibility – Fits most standard electric drills for precise vertical drilling.

    • Sturdy Construction – Made from durable aluminum for long-lasting stability.

    • Adjustable Height & Depth – Easily control drilling depth and height for accuracy.

    • Stable Base Design – Wide, non-slip base ensures safe and steady operation.

    • Precision Drilling – Provides straight, clean holes with reduced wobble.

    • Angle Adjustment – Allows angled drilling for versatile project needs (if applicable).

    • Easy to Assemble – Simple setup with included hardware and clear instructions.

    • Ideal for DIY & Professional Use – Perfect for woodworking, metalwork, and workshop tasks.

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Lathe Dog Carriers - Bent Type

    Lathe Dog Carriers – Bent Type

    0 out of 5
    • Manufactured From High Tensile Malleable Cast Iron With Very Attractive Hammer Tone Paint.
    • Useful Tool To Hold Work Pieces Securely For Smooth Turning.
    • A “V” Groove In The Body Help In Clamping Round Jobs Firmly.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Expanding Arbor - 8 Pc Set

    Expanding Arbor – 8 Pc Set

    0 out of 5
    • Chuck the shank of the expanding mandrel in a collet, jaw chuck, or fixture.
    • With an Allen Key tighten the hex draw bolt until it expands.
    • Then machine the slotted Part larger than bore of part.
    • Loosen hex draw bolt, position part, tighten draw screw. The part is now chucked and ready for machining.
    • This expanding mandrel can be used with standard collets, vises, jaw chucks and many other special fixtures.
    • These expanding mandrels are machinable by the customer.
    • Multiple expanding mandrels are also used in other special fixtures for holding multiple workpieces ‘side by side’.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • ADAPTORS NT SHANK

    0 out of 5
    • Manufactured From Hardened Steel.
    • Arbors Are Hardened & Precision Ground.
    Read moreDone

  • ARBORS NT SHANK

    0 out of 5
    • Manufactured From Hardened Steel.
    • Arbors Are Hardened & Precision Ground.
    • Supplied In ISO Shanks.
    Read moreDone
  • Blank End Arbors

    Blank End Arbors

    0 out of 5
    • Made from high quality Carbon Steel.
    • It is also known as Straight Stub Arbor.
    • It is well hardened & precision ground.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • Boring Bar With Holder

    0 out of 5
    • Manufactured from good quality tool steel.
    • Supplied with one allen key.
    • Tool bit not included .
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Collets Holders

    Collets Holders

    0 out of 5

    • High-Precision Clamping – Ensures superior concentricity for accurate machining and reduced tool run-out.

    • Durable Construction – Made from heat-treated, hardened steel for long-lasting performance in demanding shop environments.

    • Secure Tool Holding – Provides strong, reliable grip for milling, drilling, engraving, and CNC applications.

    • Wide Compatibility – Designed to fit standard ER collets and compatible with most CNC routers, milling machines, and tool holders.

    • Fast & Easy Setup – Smooth, threaded nut design allows quick collet changes and minimal machine downtime.

    • Vibration Reduction – Balanced for stable operation at high spindle speeds, improving finish quality and tool life.

    • Corrosion-Resistant Finish – Protective coating prevents rust and wear, ensuring consistent performance over time.

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • COLLET SPANNER

    0 out of 5
    •  For ER25 / ER32 Collet Holders.
    Read moreDone

  • COLLETS R8

    0 out of 5
    • Manufactured from alloy steel.
    • Precision ground bore.
    • Tolerance within 0.025mm per 25mm.
    • Drawbar thread 7/16″ UNF 20.
    Read moreDone

  • DRILL CHUCK ADAPTORS

    0 out of 5
    • Made from superior quality of steel.
    • Helps in safe and secure operations so operator friendly.
    Read moreDone
  • Drill Chuck Arbor

    Drill Chuck Arbor

    0 out of 5
    • Drill chuck arbors are double ended steel shafts.
    • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
    • Drill Chuck Arbors are essential tools for efficient and precise drilling operations.
    • These arbors are designed to securely mount drill chucks and other tools with a female taper shank onto a machine equipped with a female taper socket in its work head.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Chuck Arbor

    Drill Chuck Arbor -Taper Shank ACC Din -238

    0 out of 5
    • Drill chuck arbors are double ended steel shafts.
    • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
    • Drill Chuck Arbors are essential tools for efficient and precise drilling operations.
    • These arbors are designed to securely mount drill chucks and other tools with a female taper shank onto a machine equipped with a female taper socket in its work head.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Chuck Arbors - R8 Shank

    Drill Chuck Arbors – R8 Shank

    0 out of 5
    • Made from superior quality alloy steel.
    • These are keyed to prevent rotation.
    • Drill chuck arbors with an R8 shank are used to mount drill chucks onto milling machines and other equipment with an R8 taper spindle.
    • Designed for milling machines equipped with an R8 spindle for secure, accurate tool holding.
    • Engineered to minimize runout for smooth, accurate drilling and improved hole quality.
    • Perfect for machine shops, fabrication, metalworking, and precision drilling tasks.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Sleeves - As Per Din 2185

    Drill Sleeves – As Per Din 2185 (Un Hardened)

    0 out of 5

    • Manufactured in accordance with DIN 2185 standards.

    • Unhardened design for easy machinability and modification.

    • Made from high-quality alloy/tool steel for durability.

    • Ensures accurate alignment of drills and cutting tools.

    • Precision-ground external and internal tapers for smooth fit and high concentricity.

    • Ideal for tool holding and adapting different taper sizes.

    • Available in various Morse taper combinations (MT1 to MT6).

    • Suitable for workshops, tool rooms, and general machining applications.

     

    Request QuoteDone This product has multiple variants. The options may be chosen on the product page
  • Drill Stand - Stainless Steel

    Drill Stand – Stainless Steel

    0 out of 5
    • The same single stand is used to accomodate the different sizes of drill.
    • Prevents the misplacement of operations as the number to which the particular drill is belong to are engraved on a stand.
    • The flat base of drill stand helps in easy placement of drill stand wherever the operator needs.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

  • DRILL STOP SET

    0 out of 5
    • 7 Pc Set With 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ & 1/2″ Diameter.
    • Used As A Stopper Or Indicator To Drill Desired Depth Of Holes And Prevents Excessive Drilling.
    Read moreDone
  • Ejecting Drill Drift

    Ejecting Drill Drift

    0 out of 5
    • Good Quality Carbon Steel.
    • Permanently Marked For Easier Identification.
    • It Helps To Remove Taper Shank Tools Easily From Drill Sleeves & Sockets.
    • Also Available In DIN 317 Standard Upon Request.
    Request QuoteDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content